Measurements of Ozone Concentrations in Zagreb

Ozone concentrations were measured in Zagreb at four sites from May 1999 to April 2001 in order to categorize the air quality with respect to ozone. In the summer of 2000, the ozone measurements were also extended to four sites in the suburbs of Zagreb. Methods of active and passive sampling with nitrite ion as a reagent were used. In the northern part of the town ozone was analyzed by an automatic device. Automatic device measurements in the years 1999 and 2000 showed that hourly averages of ozone concentrations did not exceed the Croatian recommended value of the 98th percentile (180 g m^–3). Over the two-year period, 24-h averages occasionally exceed 110 g m^–3 in city center and in the northern part of the town. Regardless of these isolated examples, ozone was well within acceptable concentrations. Ozone concentrations measured in summer 2000 were higher in the suburbs of Zagreb than in the city. The 98th percentile values higher than 110 g m^–3 were recorded at three sites.     

Total versus inhalable sampler comparison study for the determination of asphalt fume exposures within the road paving industry

Exposure to asphalt fumes has a threshold limit value (TLV of 0.5 mg m(-3) (benzene extractable inhalable particulate) as recommended by the American Conference of Governmental Industrial Hygienists (ACGIH). This reflects a recent change (2000) whereby two variables are different from the previous recommendation. First is a 10-fold reduction in quantity from 5 mg m(-3) to 0.5 mg m(-3). Secondly, the new TLV specifies the "inhalable" fraction as compared to what is presumed to be total particulate. To assess the impact of these changes, this study compares the differences between measurements of paving asphalt fume exposure in the field using an "inhalable" instrument versus the historically used 'total' sampler. Particle size is also examined to assist in the understanding of the aerodynamic collection differences as related to asphalt fumes and confounders. Results show that when exposures are limited to asphalt fumes, a 1:1 relationship exists between samplers, showing no statistically significant differences in benzene soluble matter (BSM). This means that for the asphalt fume ACGIH TLV, the 'total' 37-mm sampler is an equivalent method to the "inhalable" method, referred to as IOM (Institute of Occupational Medicine), and should be acceptable for use against the TLV. However, the study found that when confounders (dust or old asphalt millings) are present in the workplace, there can be significant differences between the two samplers' reported exposure. The ratio of IOM/Total was 1.37 for milling asphalt sites, 1.41 for asphalt paving over granular base, and 1.02 for asphalt over asphalt pavements.     

Monitoring of Phenol in Wastewater Bioremediation by HPLC

Bioremediation emphasizes the detoxification and destruction of toxic substances by microorganisms. Wastewater obtained from an industrial concern was solvent extracted with methyl alcohol and dichloromethane and analysed by GC/MS. Besides phenol, a large variety of organic compounds were detected. Under controlled laboratory conditions, the wastewater was innoculated with a mixed culture of microorganisms specially selected for their abilities to degrade phenol. Samples were collected at regular intervals from the stirred tank bioreactor and analysed for phenol by reverse phase HPLC with a C18 column. Results shows that from an initial phenol concentration of 987 ppm, slightly more than 50% was destroyed within 163 hours. The dry weight of the microorganisms and the plate count (CFU/ml) shows a steady increase from 0.5238 gms to 0.5355 gms and from 1.1E+9 to 1.94E+13 respectively over the same period. This suggested that the phenol was consumed by the microorganisms as the sole carbon source.     

The Influence of pH on Mobility of Heavy Metals from Municipal Solid Waste Incinerator Fly Ash

Incineration has become one of the principal methods for municipal solid waste disposal particularly in all large cities throughout the world. Currently, the municipal solid waste incinerator fly ashes (MSWIF) are disposed of by landfill. The metal speciation of cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), and zinc (Zn) in MSWIF after been extracted with water at different pH values were examined using a sequential extraction procedure. The extraction sequence was as follows: (1) Exchangeable (NaOAc, pH 8.2), (2) Bound to Carbonates (NaOAc, pH 5.0), (3) Bound to metal oxides (HONH3Cl), (4) Bound to organic matters (HNO3, H2O2), and (5) Residual (HNO3, HCl, H2O2, HF, 1:3:1:3). The heavy metal contents in the extraction solutions were determined by inductively coupled plasma atomic emission spectrometry. The heavy metal concentrations in the different fractions obtained by sequential extraction show distinct distribution trends. The extractable fraction ranges from 25.5 to 88% of the total element content. With the pH of the extractant fall below the neutral and acidic ranges, the concentrations of heavy metals rise substantially due to the released of metals bound to carbonate fraction.     

Fractionation of heavy metals and phosphorus in suspended sediments of the Yamuna river,India

The Yamuna river is the largest tributary of the Ganges river system. It originates in the Himalayas and flows through a varied geological terrain encompassing a large basin area. Metals Fe, Mn, Pb, Zn, Cu in different chemical fractions of suspended sediments such as exchangeable, carbonates, Fe–Mn oxides, organics and residual fractions were studied. Phosphorus associated with different chemical forms are discussed. The metals are mostly associated with residual fractions in the sediments followed by organics, Fe–Mn oxides, exhangeable and carbonates. Intensive use of chemical fertilizers and pesticides in agriculture in the basin affects the high inorganic phosphorus content in sediments.     

Labelling ecofriendly products in india — an emerging option for environmental production

Summary The labelling of ecofriendly products has been introduced in a number of developed countries to assist in the protection of the environment. Recently, developing countries like India, have introduced the scheme. This paper examines the steps involved in establishing the Indian Ecomark. For the successful implementation of the scheme the effective coordination of a number of agencies is necessary. Consumers, as well as manufacturers, have to be educated in the longterm benefits of the scheme. Initiatives necessary for the successful implementation of Ecomark have been highlighted.Mr S. S. Arvind is a member of faculty at the Centre for Energy, Environment and Technology, at the Administrative Staff College of India. He is currently on secondment to the Centre for Technology Development, Clark University, 950, Main Street, Worcester MA 01610-1477, USA. Mr E.V. Muley is a scientist working for the Ministry of Environment and Forests, Government of India, Paryavaran Bhavan, CGO Complex, Lodi Road, New Delhi 110003, India.     

Transformation of Organic Matter of the Larch Forest Soils in the Northern Taiga of Nizhne-Tungusskoe Plateau, Central Siberia

The evaluation of biospheric role of the boreal forests in the accumulation of carbon is connected with the evaluation of organic matter (OM) pool in soils. The research sites were larch forests, they are situated on Nizhne-Tungusskoe Plateau. Larch forests of feather-moss and lichen types (110 and 380 years old) were formed on 'ochric podbur' soils. Litter stocks are 3.5–4.5 kg m^{− 2} with thickness 10–25 cm. Cryomezomorphic northern taiga soils contains 38–73 t (carbon) ha^{− 1}. Pool of fast mineralized OM has average value 38.1 t (carbon) ha^{− 1}, including 20.5 and 6.4 t (Carbon) ha^{− 1} of labile compounds on surface and in the soil, and 11.2 t (carbon) ha^{− 1} of mobile OM. Microbial mass reaches 1.78–3.47 t (carbon) ha^{− 1}, its proportion is 3.6–4.9% of the total OM carbon. Zoomass of feather-moss larch forest is 0.20–0.61 * 10^{− 2}, in lichen larch forest −0.01–0.07 * 10^{− 2} t (carbon) ha^{− 1}. A pool of resistant to biological decomposition and bonded to mineral soil matrix OM is 17.7 t (carbon) ha^{− 1} and it varies from 18.6 to 29.0 in feather-moss larch forest, and from 6.4 to 17.0 t (carbon) ha^{− 1} in lichen larch forest. Two-years field experiment has been performed to determine transformation rates of various plant litter fractions and to clarify the role of soil biota in these processes. The results showed participation of all biota groups in the decomposition of plant residues caused weight loss of larch-needles and root mortmass. Isolation of organic matter from all-size invertebrate groups leads to some decrease of decomposition activity.